Synthesis of mesoporous carbons using ordered and disordered mesoporous silica templates and polyacrylonitrile as carbon precursor

Mesoporous carbons were synthesized from polyacrylonitrile (PAN) using ordered and disordered mesoporous silica templates and were characterized using transmission electron microscopy (TEM), powder X-ray diffraction, nitrogen adsorption, and thermogravimetry. The pores of the silica templates were infiltrated with carbon precursor (PAN) via polymerization of acrylonitrile from initiation sites chemically bonded to the silica surface. This polymerization method is expected to allow for a uniform filling of the template with PAN and to minimize the introduction of nontemplated PAN, thus mitigating the formation of nontemplated carbon. PAN was stabilized by heating to 573 K under air and carbonized under N2 at 1073 K. The resulting carbons exhibited high total pore volumes (1.5-1.8 cm3 g(-1)), with a primary contribution of the mesopore volume and with relatively low microporosity. The carbons synthesized using mesoporous templates with a 2-dimensional hexagonal structure (SBA-15 silica) and a face-centered cubic structure (FDU-1 silica) exhibited narrow pore size distributions (PSDs), whereas the carbon synthesized using disordered silica gel template had broader PSD. TEM showed that the SBA-15-templated carbon was composed of arrays of long, straight, or curved nanorods aligned in 2-D hexagonal arrays. The carbon replica of FDU-1 silica appeared to be composed of ordered arrays of spheres. XRD provided evidence of some degree of ordering of graphene sheets in the carbon frameworks. Elemental analysis showed that the carbons contain an appreciable amount of nitrogen. The use of our novel infiltration method and PAN as a carbon precursor allowed us to obtain ordered mesoporous carbons (OMCs) with (i) very high mesopore volume, (ii) low microporosity, (iii) low secondary mesoporosity, (iv) large pore diameter (8-12 nm), and (v) semi-graphitic framework, which represent a desirable combination of features that has not been realized before for OMCs.     

Combinatorial invariants for nets of conics in $$\mathrm {PG}(2,q)$$ PG ( 2 , q )

Designs, Codes and Cryptography - The problem of classifying linear systems of conics in projective planes dates back at least to Jordan, who classified pencils (one-dimensional systems) of conics...     

Volumes of restricted Minkowski sums and the free analogue of the entropy power inequality

In noncommutative probability theory independence can be based on free products instead of tensor products. This yields a highly noncommutative theory: free probability theory (for an introduction see [9]). The analogue of entropy in the free context was introduced by the second named author in [8]. Here we show that Shannon's entropy power inequality ([6, 1]) has an analogue for the free entropy (X) (Theorem 2.1).The free entropy, consistent with Boltzmann's formulaS=klogW, was defined via volumes of matricial microstates. Proving the free entropy power inequality naturally becomes a geometric question.Restricting the Minkowski sum of two sets means to specify the set of pairs of points which will be added. The relevant inequality, which holds when the set of addable points is sufficiently large, differs from the Brunn-Minkowski inequality by having the exponent 1/n replaced by 2/n. Its proof uses the rearrangement inequality of Brascamp-Lieb-Lüttinger ([2]). Besides the free entropy power inequality, note that the inequality for restricted Minkowski sums may also underlie the classical Shannon entropy power inequality (see 3.2 below).Research supported in part by grants from the National Science Foundation.     

Two-Stage Fractionation of a Mixture of Pesticides by Micropreparative TLC and HPLC

JPC – Journal of Planar Chromatography – Modern TLC - A ten-component mixture of pesticides was applied to the edge of the layer in ‘frontal + elution’ mode for preliminary...     

Improved selectivity and detection limit of the carbonate-selective electrode

The properties of the carbonate neutral carrier 4-( n-hexadecyl)-3-nitro-1-trifluoroacetylbenzene were compared with those of a similar carrier, without a nitro group, studied previously. In spite of differences in the Hammett constant of the carbonyl group responsible for interaction with the analyte, the analytical characteristics of both carriers, measured under the same conditions, were comparable. Special care was taken to avoid the presence of an excessive carbon dioxide level in the diffusion layer at the membrane-solution interface. The internal reference solution was prepared without carbonate components; the external solution was protected from contact with atmospheric carbon dioxide. Under such conditions the detection limit of both electrodes was extended to 10(-11 )mol L(-1), and the selectivity towards salicylate, chloride, and acetate was significantly improved.     

Stationary phases with special structural properties for high-throughput separation techniques: preparation, characterization and applications

Stationary phases with specific structural properties for high-throughput liquid chromatographic (LC) techniques are described. Special attention was paid to phases with special structural properties, mainly containing internal functional group (e.g. amide). Such materials are generally called "embedded phases". There are phases created in amidation process of aminopropylated silica gel, especially phases based on biological compounds, like phospholipids and cholesterol, which are called immobilized artificial membranes (IAM's). The synthesis and applications of polar embedded amide LC stationary phases were also reviewed. Methods of characterization of synthesized packing materials were presented, with general focusing on spectroscopic measurements like (13C and 29Si CP/MAS NMR and FT-IR), elemental and thermal analysis as well as chromatographic quantitative structure-retention relationships (QSRR) and extended chemometric tests. The potential applications of various dedicated stationary phases in a high-throughput LC screening procedures were also presented.     

Nanostructured carbon arrays from block copolymers of polyacrylonitrile

Arrays of graphitic carbon nanoclusters were obtained by pyrolysis of nanoscale phase-separated block copolymers of polyacrylonitrile and poly(n-butyl acrylate). Upon heating in an inert atmosphere to temperatures ranging from approximately 400 to 1200 degrees C, polyacrylonitrile domains were converted into carbon nanoclusters, maintaining the overall shape and spacing, whereas the poly(n-butyl acrylate) phase was sacrificed. Preservation of the original nanoscale morphology of a block copolymer was possible only if pyrolysis was preceded by oxidation at temperatures of approximately 230 degrees C, in analogy with thermal stabilization of polyacrylonitrile precursor in the process used in the manufacturing of carbon fibers. Preorganization of the carbon precursor through self-assembly in block copolymers of polyacrylonitrile appears to be an attractive and robust strategy for templated synthesis of well-defined nanostructured carbon materials.     

Generation and reactions of substituted phenide anions in an electrospray triple quadrupole mass spectrometer

Substituted benzoic acid anions undergo decarboxylation in the medium-pressure region of an electrospray ion source yielding in most cases the correspondingly substituted phenide anions in high yield. The location of the anionic center is specified by the position of the carboxylic group. The only exceptions are compounds with substituents containing acidic hydrogen atoms, like OH and NH(2) groups. For such compounds, either an intra- or an intermolecular (mediated by the molecules of methanol or water) proton transfer from the more acidic position to the benzene ring is observed. The generated anions can be selected using the first quadrupole for studying their ion-molecule chemistry in the second quadrupole of a triple quadrupole mass spectrometer. Their reactions with CO(2), O(2), CH(3)COCH(3) and CCl(4) may serve as typical examples. The general applicability of this method for the generation of phenide anions has been confirmed on three different mass spectrometers. Experiments performed using carboxylic acids other then benzoic acid and its derivatives show that this method is not limited to phenide anions and can be used for the generation of a much wider range of carbanions in the gas phase.